Autocad, Command Array (AR)

Oleh Unknown

Bagikan :

Tweet

On this occasion we will discuss how to use the Array in autocad

Array (short command "AR") is a command to duplicate / reproduce objects with the same distance and the same shape, useful for those of you who often menggabar Gedun buildings, for example, to draw a distance kolom2 sema ...: D

Immediately, in the discussion without much Preamble hehehe .........: D

Array in Square Shape

1. Who are the object beforehand, which will multiply with Array

 

2. Type "Ar" will exit sub menu array, click select objeck (selected object)

3. Enter the number of rows in the Rows (in this tutorial "2") and the number of colom in colums (in this tutorial "4"), and enter the Offset distance for example Rows Rows 2 and 4 colums Offset, and enter (Ok),

4. Eat object will multiply with the same distance, the distance Lines 2 and Colom 1 premises colom number of lines 2 and 4



Array In Shape Circle

1. Prepare Objects

2. Type in Ar, then a sub menu will appear Array, and check the Polar Array Array models circle, and slect Objects.

3. Determine the Center point Array, (in this tutorial "0.0") r ate her in reading between the distance to the object center pont (In this tutorial r: 5 on Coordinat 0.0)

4. Enter the number of objects in the Total Number Of Items (in this tutorial "20"), Angel To Fill (in this tutorial "360" radius 0 s / d 360)

5. And Enter (Ok)

6. Check "Rotete Items As Copied" As an object to follow (back to step No. 4)

7. Enter (Ok)

Tedengggggggggg Done ...
In the application of these arrays in AutoCAD is easier than making this tutorial ,,,
For those who do not understand please love komenta .....

Good luck ,,, Greetings Cad: D

 

Tag : Tutorial AutoCad