In making drawings like floor plans sometimes we need a certain order to make our work more quickly. Such as the command to create a line the walls like below.
 |
To
make a picture like the one above long when using commands such as
line, then it will membutukan very long time to offset plastering line. So I try to present a tutorial to make gari splesteran line the walls along with multiline commands.
1. from the commandline TYPE MLSTYLE- enter. Then the image will appear as below.
1. from the commandline TYPE MLSTYLE- enter. Then the image will appear as below.
2. Select the command New. It will open a window like the one below.
3. Fill out the "New Style name" with the name you want. On this occasion I menggunakannama "WALL"
4. Click "Continue" will display the window below.
4. Click "Continue" will display the window below.
5. Click the "Add" 2 times. Because I will make a wall with centimeter unit is 15 cm. So I changed the offset value sequentially from the top of 7. 5, 5.5, -5.5, -7.5.
6. Then select the command OK. Then the following window will appear.
7. Click the left "WALL". Lalupilih "Set Current". Then OK8. Then type the command "ML" enter - "S" Enter - Fill in the numbers 1 - Enter9. Pull multiline result will be as shown below.
Tag :
Tutorial AutoCad
0 Komentar untuk "HOW TO ADJUST OFFSET MULTILINE "